MID Three phase current meter 3-phase current meter 400V active current kVarh reactive current power current RS485 Modbus IR & S0 interface ZS6

Item number: ZS6

Category: Polyphase Meter

69,99 €

including 19% VAT., plus shipping (Standard)

Available now!

Shipping time: 1 - 2 workdays


Our Multimeter DTS-353F-2 MID is one of the few MID calibrated 3-phase multimeter / 3-phase 400V meter (10 / 63A) with digital display for DIN rails. It is designed for quick snap-on mounting on DIN rails and is therefore suitable for installation in almost all fuse boxes and electrical boxes. The counter can record and display the following values for each phase:


? Electricity consumption (kWh kilowatt hour)
? Active energy / active energy (kWh)
? Reactive Energy / Blind Labor (kVarh Kilovar hour)
? Active power (kW)
? Apparent power (kVA)
. Voltage (V volt)
? Current (A ampere)
? Network frequency (Hz)





The DTS-353F-2 MID is ideal for billing the feed-in tariff for solar systems, photovoltaic systems and PV systems. It fulfills all requirements due to its MID calibration and backstop for an approved, error-free operation. Ideal also for checking the consumed kWh or kvarh in machinery, factories, plants, power sections, ....

The device has an S0 interface, an RS485 Modbus and an IR infrared interface.




The kWh / kvarh multimeter has been designed in accordance with CE-EN61036 and complies with CE requirements as well as EN61010 and EN61326. It belongs to the highest accuracy class 1. With its 6 digital digits and two decimals all selectable values are quickly readable.

Electronic energy meter for 3-phase three-phase current according to EN 61036, for 4-wire three-phase network. The approved operating range of this counter is 1% of the rated current, ie at 0.25-5 (80): I (n) = 8A, 1% of I (n) = 0.08A, maximum load 80A. An approved operating range of 0.08A ... 80A.


Technical specifications:
Approved meters approved for billing purposes (MID)
Connection: 3x230V / 400V 5 / 80A, 50 / 60Hz
Accuracy class: 1
Mounting: DIN rail (DIN EN50022) / 4TE = 76mm (DIN 43880)
Pulse length: 90ms
Counts: 1000imp / kWh and 1000imp / kVarh
Display: 6 + 2 = 999999.99 kWh
Dimension: 76mm x 100mm x 65mm
Cable: 8,5mm diameter, 50mm² cross section

General data:
Power consumption: <10VA, 2W
Operating range: 184-265 VAC; 0,10 ~ 100A
Starting current Cos-Phi = 1: typically 20mA
Frequency range: 50Hz or 60Hz +/- 10%
Temperature range: -25 ° C to + 55 ° C
Relative humidity: up to 75% - short-term up to 95%



Technical Details:

3x230V/400V, 5/80A, 50/60Hz
Accuracy class :
Operating temperature:
-20 ~ 70°C (non condensing)
DIN-Hutschiene (DIN EN50022) / 4TE=76mm (DIN 43880)
Pulse length :
Impulse constant: :
1000imp/kWh and 1000imp/kVarh
6 + 2 = 999999.99 kWh
Starting current :
Average humidity value:
76mm x 100mm x 65mm
Electric wire:
Diameter: 8,5mm
Cross-section: 50mm²