Digital MID-alternating current meter current meter heavy current 220/230V *DIN rail mount* kWh RS485 Modbus & S0-Interface ZW4

Item number: ZW4

Category: Alternating Current Meter

23,99 €

including 19% VAT., plus shipping (Standard)

Available now!

Shipping time: 1 - 2 workdays



Our TMT-353-MID is a MID approved single phase 0,25-5(80)A wattmeter laid out for the fast installing on DIN rails and is therefore suitable for the installation in almost all fuse and distribution boxes. Ideally for the control of the used kWh houses, power sections or individual ranges. The device has an RS485-Modbus- and S0-interface.




Ideally for the control of totally used kWh in houses, power sections or individual ranges. The a.c. meter is conform to EN61036 and fulfills the CE requirements as well as EN61010 and EN61326. It belongs to the highest accuracy class 1. The total power consumption can be determined due to its 5+2 digit display on a single view.




Technical details:
Voltage: 230 V AC +/- 30%
Maximum current: 0,25 - 5 (80)A
Measuring range: 0,05 ... 80 A
Nominal frequency: 50 ... 60 Hz
Power consuption: < 0,8 VA / 0,4 W

Operating temperature: -20°C ... +65°C
LCD-Display 5+2-digit
LED-impulse signal (red)
Return stop/Revers lock
S0 interface 1.600 Imp./kWh (ti = 90ms)
Compatible with "S0" Din-Rail 43864 Standard, (27V, 27mA)
Accuracy class B (Measuring error < 1 %)
Dimension: 4 TE / 76mm
Maximum 16 mm²
MID accredited






Scope of supply:
Digital DIN kWh-Meter
Manual Englisch/German




- Many further measuring instruments to special prices in our shop -



Technical details:

Measuring range:
LCD 5+2 = 99999.99
0.01 kWh
Measuring Accuracy:
± 1%
Operating temperature:
-20 °C - 65°C
Power supply: 
230V 5/80A
330 g
4 TE / 76mm
Diameter: 5,65mm
Cross section: 25mm²
CE-konform EN61036, EN61010, EN61326