shore hardness tester HT-6510C is small in the
dimension, easily to transport and light in weigt simply. The Durometer
HT-6510C is our standard model for the measurement of the hardness
in shore C from middle hard rubber, gum and thermoplastic.
can use the HT-6510C locally as hand measuring instrument or for
the material testing in the laboratory. The testing set consists
of a probe with measuring head as well as a digital display showing
the measuring results in a resolution of 0,1 degrees of
The HT-6510C corresponds to the standards DIN 53505, ISO 7619 and
ASTM D 2240. Our equipment has a RS-232 interface
to transfer the measured values to a laptop or a PC. Software
and cables (SW2) are optional available in our shop.
DIN 53505, ISO 7619 and ASTM D 2240 conformal
- Large measuring range with hight resolution
- Maintenance-free digital display
- High grade probe
- HOLD function for maximum values
- AVERAGE function for measured values
- ABS plastic housing
- Measurement from hardness shore C
details & application:
Particularly in the materials technology hardness plays a huge role.
The measured hardness of a body makes possible conclusions on its
characteristics e.g. about how quickly it breaks or is being scratched.
By the hardness after shore is meant the resistance against the
penetration of a body of certain geometrical form under defined
thrust forced into a sample. The penetration way is measured and
indicated. We are recommending sample test probes with a minimum
thickness of 6 mm for optimal results of measurement. You can superimpose
if necessary. several samples, in order to obtain the minimum thickness.
The measuring point should be at least 15 mm distant from the outside