Centrifuge Centrifugal Laboratory Research Medical Practice Test Glass/Tubes Blood PRP (Platelet-Rich-Plasma) Lipofilling Autohaemotherapy ACP ZF1

Item number: ZF1

Category: Centrifuges

249,99 €

including 19% VAT., plus shipping (Standard)

Short supply

Shipping time: 1 - 2 workdays



Our new TMT-2000XC centrifuge is a practical small centrifuge for a middle sample arising. It is equipped with a 6x holder for the admission of tubes to a volume of 15ml. With a maximum RCF of 1790g our TMT-2000XC is the ideal equipment for each laboratory or medical practice. For the flexible admission of many different sample containers (6 x 15ml, 6 x 10ml, 6 x 7ml) adapters are included in the centrifuge. Many sample tubes can be used without additional adapters. The area of application of our table centrifuge is not limited to any operation field, ideal for research and industrial laboratories. Ideally for research and teachings!

Which tubes can be used?
You get 6 plastic tube adapters with the centrifuge. They are for all probe containers with a length of max. 120mm and a diameter of max. 17mm. For example: Sarstedt Monovettes, Vacuette/Vacutainer, Kabevette etc.




State-of-the-art, yet simple, this centrifuge is easy to operate, the time and speed function allow you to set and adjust parameters quickly and easily. With space-saving footprint and innovative design.

Designed for general laboratory use, the centrifuge is quiet and smooth spinning equipped with auto shut off when the lid is raised. The shell is made of industrial ABS plastic for durability and is easy to clean, with six tube capacity, including 2 sets of holders 15ml & 10ml. Timer & Speed Control variable one touch programming of speed and time with LED display panel. Memory function remembers last operation settings.

Field of application PRP (Platelet-Rich Plasma):
The frequent application ist the separation of the erythrocytes from the plasma fraction in the centrifuge (2500 revs per minute for 10 minutes). Remove the plasma fraction with a cannula. In a second monovette you win with 4000 revs per minute for 10 minutes the speration platelet poor from the platelet-rich plasma fraction.

Field of application Lipofilling:
The removed transplantable fat cells are separated of the unsuitable cells. For this process you need a centrifuge with a rotation speed of 3500 revs per minute. This takes only 3-5 minutes. Our centrifuges ZF1, ZF2, ZFB and ZFD are the best for this operation.

Autohaemotherapy ACP:
With a double syringe about 10-12ml blood are remove and then centrifuged for 5 minutes at 1500 revs per minute. Extract the separated plasma components with the second syringe and inject within half an hour in the injured site. Our centrifuges ZF1, ZF2, ZFB and ZFD are the best for this operation.

Technical details:
- Power supply: 220-230V/50Hz
- Timer & speed control
- Variable one touch programming of speed and time with LED display panel
- Memory function: remembers last operation settings
- Speed: 1000-4000 revs per minute (500 steps)
- Max. RCF: 1790g
- Time range: 1-60min
- Power consumption: 50 Watt
- Weight: 5100g




Technical details:

Power supply:
Power consumption::
50 Watt
1000 - 4000 revs per minute (500 steps)
6 x 15ml, 6 x 10ml, 6 x 7ml
Maximum RCF:
1790 g
Time range:
1 - 60 min
5100 g