LED-Illumination lighting (warmwhite, 60cm) simulation controlling terrarium/vivarium reptile/snake amphibian/frog arachnid/scorpion insect/ant TB4WW

LED-Illumination lighting (warmwhite, 60cm) simulation controlling terrarium/vivarium reptile/snake amphibian/frog arachnid/scorpion insect/ant TB4WW

SKU: TB4WW
GTIN: 4260216877131
Category: LED-Illumination

97,99 €

incl. 19% VAT , plus (Standard)

Available immediately
Delivery time: 1 - 2 Workdays (Other countries)

Description

With our TMT-WP18W-L18 warmwhite you receive a perfect computer-controlled powersaving LED lighting system for your terrarium with any length from 60-90cm. The installation is realised in less than 5 minutes. Even if you want to replace your old energy-waisting T8 or T5 lighting system this is achieved in a few minutes. Simply open the cover, remove the old one completely from your terrarium set and install the new one, close the cover - finished!

With this new LED technology 90% of the used energy is converted into light now. This means during the same lightning achievment an energy saving of approx. 68% is available. Also you get an extended life span of up to 100.000 hours (approx. 15.2 years at daily 18 operating hours).

With that freely programmable daylight and moon simulation your small world slides over to a gentle sunrise (1) to the daylight, in order to reach at noon the maximum daylight (2). Continuing to a sunny afternoon into the evening light (3) until finally after dawn (4) the moon rises (5). Also you may program any 30-stage simulation by the included remote control.

With the included remote control you can control all channels individually in 10% steps (0-100%) or stepless (warmwhite 3250K). Also you can switch on and off daylight automatic as well as programm the time. Please see here, which set is the right one for your terrarium. Visit our illumination guidebook.

Extendable assembly clip for individual adjustment of terrariums of 60-90cm.

Full aluminium housing. Further sizes and models here.

Each ground system (controler+LED bar) can be upgraded with an additional LED bar. All necessary interfaces are provided in the ground system. You only need one additional LED bar. You will find the additional bars here.

If you do not want to install the system in the cover
you will find the matching clips/clamps here.

Technical details:

Length:	600 mm
Width:	30 mm
Height:	20 mm
Number of hipower LEDs:	18
LED Ratio:	4:1 (white/red)
Luminous color:	3000 Kelvin (warmwhite)
Lightning current:	1080 Lumen
Operating voltage:	100-240V / 50-60Hz
Operating temperature:	-20 - 60°C
RC range:	10 m
Max power consumption:	18 x 1 W
Weight:	500 g
Material/color:	Aluminium/silver