Our DTS-353 (analog) is a 400V Three-Phase Modular Watt-Hour Meter (10/63A) laid out for the fast installing on DIN rails and is therefore suitable for the installation in almost all fuse and distribution boxes. Ideally for the control of the used kWh houses, power sections or individual ranges. The analogue display even allows to read the values after a posible fail of the device in contrast to any digital display.

The kWh is conform to EN61036 and fulfills the CE requirements as well as EN61010 and EN61326. It belongs to the highest accuracy class 1. The current power consumption can be determined due to its 6+1 display on a single view.

Technical specifications:
Voltage operation range: 3x 230V/400V 10/63A, 50/60Hz, 3-Phase
Return stop/Revers lock
Accuracy class: 1
Installation:DIN rail (DIN EN50022) / 7TE: 125mm (DIN 43880)
Impuls length: 90ms
Display: 6 + 1= 999999.9 kWh
Dimension: 125mm x 100mm x 65mm
Cable: 8,5mm diameter, 50mm² cross section

General data:
Current consumption: < 10VA, 2W
Voltage operation range: 184-265 VAC; 0,1 ~ 63A
Starting current Cos-Phi=1: 20mA
Impulse contant: 800imp/kWh
Frequency range: 50Hz or 60Hz +- 10%
Temperature range: -20°C to +55°C
Relative air humidity: to 75% - at short time value 95%
Optical coupler (SO DIN 43864)

Scope of supply:
Digital DIN kWh-Meter
Manual English/German