Centrifuge 12x15ml Angle Rotor brushless Laboratory Research Practice Blood ZF3

Item number: ZF3

Category: Centrifuges

999,99 €

including 19% VAT., plus shipping (Standard)

Short supply

Shipping time: 1 - 2 workdays


Our new TMT-L-600A centrifuge is a practical small centrifuge for a middle to higher sample arising. It is equipped with a 12x holder for the admission of tubes to a volume of 15ml. With a maximum RCF of 5120g our TMT-L-600A is the ideal equipment for each laboratory or medical practice. For the flexible admission of many sample containers (12x15ml) adapters are attached. Many sample tubes can be used without additional adapters. The area of application of our table centrifuge is limited to any range like practice but also for research and industrial laboratories. Ideally for practice, research and teachings!

Which tubes can be used?
You get 12 metal tube adapters with the centrifuge. They are for all probe containers with a length of max. 108mm and a diameter of max. 17mm. For example: Sarstedt Monovettes, Vacuette/Vacutainer, Kabevette etc.




Our centrifuge requires little space and is maintenance-free due to its advanced brushless motor, extremely quiet with less than 65 dB (A) at maximum speed and virtually vibrationless in operation. State-of-the-art, yet simple, this centrifuge is easy to operate, the time and speed function allow you to set and adjust parameters quickly and easily. Quiet and compact with its space-saving footprint and innovative design.

Designed for general laboratory use, the centrifuge is quiet and smooth spinning equipped with auto shut off when the lid is raised. The shell is made of industrial ABS plastic for durability and is easy to clean. Timer & Speed control variable one touch programming of speed and time with LCD display panel. Memory function remembers last operation settings.




Field of application PRP (Platelet-Rich Plasma):
The frequent application ist the separation of the erythrocytes from the plasma fraction in the centrifuge (2500 revs per minute for 10 minutes). Remove the plasma fraction with a cannula. In a second monovette you win with 4000 revs per minute for 10 minutes the speration platelet poor from the platelet-rich plasma fraction.

Field of application Lipofilling:
The removed transplantable fat cells are separated of the unsuitable cells. For this process you need a centrifuge with a rotation speed of 3500 revs per minute. This takes only 3-5 minutes. Our centrifuges ZF1, ZF2, ZFB and ZFD are the best for this operation.

Autohaemotherapy ACP:
With a double syringe about 10-12ml blood are remove and then centrifuged for 5 minutes at 1500 revs per minute. Extract the separated plasma components with the second syringe and inject within half an hour in the injured site. Our centrifuges ZF1, ZF2, ZFB and ZFD are the best for this operation.




Technical details:
Power supply: 230V/50Hz
- Timer & speed control
- Variable one touch programming of speed and time with LED display panel
- Memory function: remembers last operation settings
- Speed: 6000 revs per minute
- Max. RCF: 5120g
- Time range: 1-99 min
- Power consumption: 90 Watt
- Weight: 23000g





Technical details:

Power supply:
Power consumption::
90 Watt
6000 revs per minute
12 x 15 ml
Maximum RCF:
5120 g
Time range:
1 - 99 min
23000 g

Other customers have also bought the following items